A fisherman, or simply the person who does fishing as a hobby, knows how to choose the best baitcasting rod for the money and so should you. Doing so, will make you yearn for more fishing trips, and life will be more thrilling.
Choose The Best Baitcasting Rod for the Money From The Below List:
- Zodias 7′ 2″ Med Casting Rod
- Croix Premier Series Casting Rod
- Fenwick HMG Spinning Rod
- KastKing Perigee II Fishing Rod
- UglyStik GX2 Casting Rod
What is a fisherman without a proper baitcasting rod though? I know we agree on this one that the answer is “an amateur”.
Think about the fishing expeditions that await you. If you are looking forward to having a good time, then you must have also thought about how you will fish without any hindrances. You will agree will me that fishing not allows you to challenge yourself and savor the accomplishment of catching the fish, but also makes you enjoy life as you play around with the prey.
The Shimano Zodias Casting rod is built to accommodate a variety of lures, from frogs to Fluke’s, and from Senko’s to spinnerbaits. It is also built to enhance a maximum angling distance and the accuracy of your throws. The manner in which it is designed ensures more power efficiency and increased sensitivity along with the reduction in the blank twist.
Zodias 7′ 2″ Med Casting Rod
Every Zodias you purchase is usually outfitted with the Shimano CI4+ reel seat that caters for maximum sensitivity. For excellent ergonomic capabilities, this baitcasting rod has an Eva Handle Grip. With the Fuji Alconite guides, you are better placed to control the bait position to increase your chances of catching the fish.
It also allows you to fine-tune its mechanics according to the species of fish that you are targeting.
This is one of the best baitcasting rods for the money. It is built using premium-quality SCII graphite that caters for its strength. It is also a very sensitivity rod that offers outstanding hook-setting power. This baitcasting rod has finely tuned tapers which guarantee you very superior performance.
St. Croix Premier Series Casting Rod
The Kegan Master Hand 3D guides in the St. Croix Premier Series Casting Rod features slim but strong aluminum-oxide rings that have black frames. These guarantee you the desired strength and allow you to capture heavier fish. This rod is handcrafted in Park Falls, U.S.A, where every single detail of the rod is taken into consideration to ensure that you have the best fishing experience.
The Fenwick HMG Spinning Rod is another bait casting rod that you should purchase for use in your fishing trips. This rod is fitted with an AAA cork full grip that enables to hold it comfortably and to control the entire rod without its slipping off. The reel seat in the Fenwick HMG Spinning Rod is fitted with a positive lock design which enables you to secure the reels.
Fenwick HMG Spinning Rod
The carbon-bound blanks in this baitcasting rod are usually spiraled with carbon threads, thus creating unparalleled strength as well as precise action, making it one of the best baitcasting rods for the money paid. With the Fuji guides that are made of stainless steel deep pressed frames that have aconite inserts, you can comfortably position your lure, as well as drag your lure.
- Does not work with older Shimano reels
- Mostly suitable for fishing in shallow water
- The reel seat may be too wide.
- The reel may fall out at times even with a little wiggle
The KastKing Perigee II Fishing Rod is all about quality. It comes with premium components such as the Fuji guides, high-strength reel seats, and exceptional EVA grips. It has a fine carbon fiber finish that gives it the lightweight and enables you to cast it easily.
KastKing Perigee II Fishing Rod
It has fast rod action, making it one of the most efficient rods available in the market. It has the KastKing Power Transition System and a specialized computer that controls wrapping, and these two work in conjunction to keep the power flowing. The rods are constructed using Toray 24-ton carbon blank technology that makes them powerful and accurate.
They are also available in 29 different sizes that range from the ultra-light spinning fishing rods to the heavy 7-inch spinning rod. The best thing about this rod is that some of the best qualities of a fishing rod, and you can access it in the market at a very fair price.
The UglyStik GX2 Casting Rod is at times labeled as America’s strongest, and most sensitive rod, and is definitely one of the best baitcasting rods for the money. This rod features a virtually indestructible blank construction that is made from fiberglass and carbon fiber to withstand harsh conditions and to give the desired performance.
UglyStik GX2 Casting Rod
This rod gives you the strength required to subdue the fish when using a range of fishing techniques.
It also features a clear tip design grants the fisherman exceptional responsiveness. The tip design enables you to detect even the faintest nibbles on your lure, for you to time your hook perfectly, and for you to improve your success rate at capturing the fish.
You can also benefit from this rod lightweight and ergonomic design that is meant to provide comfort. This rod has a long-lasting and light EVA grip that gives you the most desired handhold as you struggle with the prey. It also features Ugly Tuff guides that are compatible with a variety of lines.
Baitcasting rods are very crucial tools in fishing, and to a great extent determine your success rates with catching the fish. Below are all the facts that you need to know about baitcasting rods:
General information about baitcasting rods
When shopping for baitcasting rods, you should be aware of the terminologies used by both the sellers and the users of the rods. It is not cast on stone that you should learn these terminologies, but you will realize that knowing the terms will come in handy, and will make you look like a veteran in fishing. Below is some of the information that you require to know about the rods:
Baitcasting rods are created to be used along with reels that are situated in such a way that the reel faces the angler. There are different types of grips but I am a big fan of the trigger-style grip. The grips basically help you control the entire rod during the casting process and at the time you are struggling to get the fish out of the water.
Terminologies used with baitcasting rods:
This is essentially the basic structure of the baitcasting rod, which is usually made of fiberglass or carbon fiber in most occasions
This is a special reel created to be used along with the baitcasting rod. The general rule that is observed by fishermen is that the baitcasting rod should match the baitcasting reel and vice versa.
This is a fitting that is placed on the last quarter section of the blank and is meant to secure the baitcasting reel to the blank.
This is basically the diameter of a fishing rod, relative to the tip.
Rod butt or butt section
This is simply the part of the entire rod that is usually situated closest to the fisherman’s body when they are fishing. This part is usually the heaviest and, in most occasions, the thickest section of the baitcasting rod.
This is the opposite end of the baitcasting rod’s blank, as viewed from the rod butt. It is the section in which the tapered length of the rod ends.
Guides or eyes
Guides are metallic or titanium ring-shaped implements that run from the blank of the control line fitted to the baitcasting reel all the way to the tip of the rod. Guides are on most occasions usually coated to ensure that a smooth surface is created, so that the fishing line can run easily through them.
Grips protect an angler’s hands, besides preventing the entire rod from slipping away. They are usually made of EVA foam or cork for them to effectively transmit sensation to the angler’s hands.
This refers to the manner in which the baitcasting rod bends when the angler applies pressure on the tip. Fast action rods usually bend only in the top 1/3 part of the blank. The moderate action blank usually bends in the top half part of the blank, and the slow action rod usually bends from the lower 1/3 part of the baitcasting rod. The slow action rods are sometimes termed as “parabolic” to imply that they at times bend throughout the length. The nature of the mature used to make the rod usually determines its action.
This essentially points to the strength of the baitcasting rod, or simply its lifting power. When an angler says that their rod has a lot of backbone, they simply imply that it has a lot of power. Power ratings usually follow a unique definition pattern, such as heavy, medium heavy, medium and so on. Power is usually related to the strength of the line. The heavier power rods are capable of handling heavier line weights, whereas the lighter power rods are in a position to handle the lighter lines.
This simply refers to the ability of the baitcasting rod to flex under the weight of the entire load and to then release the energy that is stored in the cast. A general rule of responsiveness with the baitcasting rods is that the lighter the rod is, the more responsive it is likely to be.
Conditions under which baitcasting rods are used
Baitcasting rods are meant to be used in specific situations. The most common situations under which they should be used include:
- When you intend to use heavier lure and heavier fishing lines
- When you are seeking for accuracy and control during the fishing process
- They are much more controllable
- Enables you to be accurate with your approach
- They are more powerful
- Allows you to use a heavier line
- Allows you to apply much more drag pressure
- They have high pick up rates
- Are easier to pair with baitcasting reels
- Allows for a longer distance in comparison with the spinning reels
- Takes longer to learn to use
- Are harder to maintain
- Are quite expensive
- If one has no experience, they are complicated to use
- Wears out the lighter fishing lines
- Fishing lines dig into the fishing pole when flexing
How size and weight affect the casting distance
The casting distance, as many anglers will agree, is a very important consideration as one is selecting the rod action, and the time it takes for the blank to get back to a straightened or a neutral position after being exposed to a load. “Slow” blanks flex for about ¾ of the total length, and this is viewed with reference to the range of motion.
When describing the casting ability, the action of rod usually pertains to the energy available in the rod, and this quality is usually termed as the “rod loading “. The casting ability is usually dependent on the rod load.
Materials used to make baitcasting rods
The material used to make the baitcasting rod plays a major role in the determination of its quality. It also determines the price at which the baitcasting rod goes for. Some of the most common materials that are used in the current-day world include:
– Fiberglass – this is the preferred option if you are looking for a durable rod. Baitcasting rods made using this material are also good for fishing in shallow water.
– Carbon fiber /graphite –this is the preferred option when sensitivity is required. Baitcasting rods using this material are the best for fishing in deep water.
- What is linebacking?
Backing is essentially the thing diameter line that is fixed on the reel right before loading the fly line. This line serves two main purposes, which are: providing sufficient line for the fisherman to play with the big fish and for the provision of a base on which to wind up the fly line.
There are backings that are made of monofilament. These should be avoided except in very special situations. You can rely on braided dacron backing since it does not have kinking problems or memory problems as many people love to put it.
This type of linebacking does not also stretch that much hence is good for use when you intend to capture big fish. Furthermore, this type of backing does not damage the spools on your reel, which is something that monofilament backing is capable of doing.
The most practical benefit of having linebacking is that it enables you to play with the fish, more so those that try very hard to escape from you.
- What taper should I purchase?
Your choice of a taper is dependent on the type of water that you intend to go fishing into. If you are starting off with fresh-water bodies, the double-taper will do you justice. This taper has been applauded for being the one that presents the small dry fly in the most delicate way.
Another reason why the double taper is good for fresh-water fishing is that it rolls casts quite efficiently. It is actually the best option since it can cast easily in quite a variety of situations when using different fishing techniques. The other reason is that it is economical.
If half of your double taper gets worn out, you can always find a way to reverse it, thus doubling the life of your taper. This is especially beneficial if you do regular fishing.
For those who do salt-water fishing where the conditions are a bit different, the weight forward taper is the best option for you. Even so, you should have a double taper in your gear bag at all times.
- What length of rod should I purchase?
The market has both short and long rod. The short rods are in most times those below 8 feet in length and the tall rods are those above 8 feet. If you are looking forward to purchasing the shorter rods, you should know that they come with several disadvantages.
The first disadvantage is that they are harder to learn to cast with. Another disadvantage is that short rods do not allow for efficient nymph fishing.
Long rods are usually the preferred option since they allow for quick line mending as one is fishing both upstream and downstream. Also, longer rods make it possible for you to switch from the use of dry flies to the use of nymphs very effectively.
Furthermore, if you want to take advantage of your high position as you wade deeper into the water body, or if you want to position the lure farther away from you, then the best rod will be a long rod.
One thing to observe, however, is that shorter rods are good for beginners, but the longer ones become the better option as one gains experience.
- What should I do about line twist?
If you encounter this problem, it means that your line was in one way or another not wound on the spool in the right manner. For the reels that have slow or even super slow oscillation, you must wind the line using the reel. If the line roller bearings keep on binding, lubricate using oil, or replace the line roller bearings.
- Why does my reel not cast as far as it used to?
The problem of the reel not casting as far as it used to is in most cases usually attributed to dirt and corrosion. This means that you should inspect the support bearings of your spool for smoothness and any corrosion.
If they are not smooth, or if they are corroded, you should immediately replace the bearing. If there is excessive dirt on the spool shaft or lip, get some rubbing alcohol and clean the dirt. This will solve the problem and the reel will get back to casting as far as it used to.
When looking for the best baitcasting rod to purchase, you should consider a number of variables. You should be well-informed about what the rod being presented to you was designed for and what materials were used to make it.
The other factors that you should consider are the length and the weight of the rod, as well as the technique of fishing that the rod can support. Searching for an appropriate rod can be a difficult task, but with the above-listed baitcasting rods, you have a good range of choices to select from.
- Choose The Best Baitcasting Rod for the Money From The Below List:
- General information about baitcasting rods